Cooling Tower Fills Manufacturer
Replacement fills for RCC and FRP cooling towers: PVC film fill, extruded V-bar splash fill and standard splash fill. We supply cement, power, paper, tyre and steel plants.
- Film, V-bar and standard fills
- RCC and FRP towers
- Standard fill 600 × 300 × 150 mm
- Cement, power, paper, tyre, steel
About Us
Since 2016, CJP has supplied, manufactured and serviced plate heat exchangers for industry and OEMs across India. From our Chennai works we make gasketed units, cooling tower fills and replacement plates and gaskets, and our crews install and service them.
We make film, V-bar splash and standard fills for RCC and FRP towers, chosen to suit your water and supports.
Our Clients
Cooling Tower Fills Manufacturer
A fill is replaced for one of two reasons. It has fouled or collapsed, and the tower no longer reaches its approach. Or the water has changed and the fill was never right for it. The water and the tower supports decide which of the three fills below suits you. Thermal rating alone does not decide it. Film fill gives far more surface area per cubic metre. Splash fill tolerates solids that would block film fill. Branded media has its own page: the Munters-designed MM Aqua range, listed by model.
Send your tower dimensions and a photo of the current fill on its supports. We quote the fill type, the volume and the freight.
Film Fill
PVC film media. It gives high thermal efficiency when the circulating water is clean enough.- Material
- PVC
- Suited to
- Treated circulating water in RCC and FRP towers
- Resistance
- Chemical and weather resistant
V-Bar Splash Fill
Extruded V-bar, for water with solids that would foul a film pack. Towers on bench ties are usually built for this fill.- Material
- PVC
- Profile
- V-bar, extruded, with a formed strengthening rib
- Support
- V-bar support seated to the bench tie
- Punch options
- Rhombus or round
Standard Splash Fill
The stock splash fill for FRP towers. One size, two colours.- Material
- PVC
- Size
- 600 × 300 × 150 mm
- Colours
- Blue and black
- Tower type
- All types of FRP cooling tower
What We Need to Quote
Send what you have. We will ask for anything missing. This is the full list.- Tower type (RCC or FRP), internal length and width, and the fill height available
- Circulating water flow rate, in m³/hr
- Hot and cold water temperature, and the design wet bulb
- The fill now in the tower: its type, and a photo of it on its supports
- Support arrangement: bench tie or grid spacing
- Water quality: suspended solids, hardness and the treatment in use
- Quantity wanted, in m³ or in pieces
- Tower location, for freight, and whether you want the old fill removed
Send Us the Details
Send your tower dimensions and a photo of the current fill on its supports. We quote the fill type, the volume and the freight.
Frequently Asked Questions
01How do we choose the right fill for our tower?
The water quality and the tower supports decide it. Send us the tower type (RCC or FRP), the dimensions, the circulating water flow, the hot and cold water temperatures and the design wet bulb. Tell us the suspended solids and the water treatment in use. We recommend film fill for clean water and splash fill where solids would block a film pack.
02Can you supply a fill to match what is in our tower now?
Yes. Send a photo of the current fill on its supports, and its model designation if you have it. Add the support spacing or bench tie layout. We match the type, pack size and fit to the existing supports.
03How do we work out the quantity?
From the fill volume in the tower: internal length, width and fill height. You can quote the quantity in cubic metres or in pieces. If you are not sure, send the tower dimensions and we calculate it for you.
04Do you deliver, and can you remove the old fill?
We quote freight to your plant with the fill. Tell us the tower location and whether you want the old fill removed. We confirm delivery timing with the quotation.
Talk to a Specialist
Message us on WhatsApp or email. We help you choose the right product.